NETGEAR show interfaces cos-queue

Non-IP Traffic
Class
Untrusted
Traffic Class
Quality of Service (QoS) Commands
450
ProSafe M4100 and M7100 Managed Switches
show interfaces cos-queue
This command displays the class-of-service queue configuration for the specified interface.
The slot/port parameter is optional and is only valid on platforms that support independent
per-port Class of Service mappings. If specified, the class-of-service queue configuration of
the interface is displayed. If omitted, the most recent global configuration settings are
displayed.
Format show interfaces cos-queue [<slot/port>]
Mode
Queue Id
Minimum
Bandwidth
Scheduler Type
Queue
Management
Type
If you specify the interface, the command also displays the following information.
Interface
Interface
Shaping Rate
Term Definition
The traffic class used for non-IP traffic. This is only displayed when the COS trust mode
is set to trust IP Precedence or IP DSCP (on platforms that support IP DSCP).
The traffic class used for all untrusted traffic. This is only displayed when the COS trust
mode is set to 'untrusted'.
Privileged EXEC
Term Definition
An interface supports n queues numbered 0 to (n-1). The specific n value is
platform-dependent.
The minimum transmission bandwidth guarantee for the queue, expressed as a
percentage. A value of 0 means bandwidth is not guaranteed and the queue operates
using best-effort. This is a configured value.
Indicates whether this queue is scheduled for transmission using a strict priority or a
weighted scheme. This is a configured value.
The queue depth management technique used for this queue (tail drop).
Term Definition
The slot/port of the interface. If displaying the global configuration, this output line is
replaced with a Global Config indication.
The maximum transmission bandwidth limit for the interface as a whole. It is independent
of any per-queue maximum bandwidth value(s) in effect for the interface. This is a
configured value.