NETGEAR logging buffered wrap, logging cli-command, logging console

Utility Commands
535
ProSafe M4100 and M7100 Managed Switches
logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default
Format logging buffered wrap
Mode
no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop when
the log file capacity is full.
Format no logging buffered wrap
Mode
logging cli-command
This command enables the CLI command logging feature, which enables the 7000 series
software to log all CLI commands issued on the system.
Default
Format logging cli-command
Mode
no logging cli-command
This command disables the CLI command Logging feature.
Format no logging cli-command
Mode
logging console
This command enables logging to the console. You can specify the <severitylevel>
value as either an integer from 0 to 7 or symbolically through one of the following keywords:
emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6),
or debug (7).
Default
Format logging console [severitylevel]
Mode
enabled
Privileged EXEC
Privileged EXEC
enabled
Global Config
Global Config
disabled; critical when enabled
Global Config