Routing Commands
293
ProSafe M4100 and M7100 Managed Switches
show ip ospf asbr

This command displays the internal OSPF routing table entries to Autonomous System

Boundary Routers (ASBR). This command takes no options.

Format show ip ospf asbr
Mode • Privileged EXEC
• User EXEC
Type
Router ID
Cost
Area ID
Next Hop
Next Hop Intf
show ip ospf database

This command displays information about the link state database when OSPF is enabled. If

you do not enter any parameters, the command displays the LSA headers for all areas. Use

the optional <areaid> parameter to display database information about a specific area. Use

the optional parameters to specify the type of link state advertisements to display.

Term Definition
The type of the route to the destination. It can be one of the following values:
intra — Intra-area route
inter — Inter-area route
Router ID of the destination.
Cost of using this route.
The area ID of the area from which this route is learned.
Next hop toward the destination.
The outgoing router interface to use when forwarding traffic to the next hop.
Parameter Description
asbr-summary Use asbr-summary to show the autonomous system boundary router (ASBR) summary
LSAs.
external Use external to display the external LSAs.
network Use network to display the network LSAs.
nssa-external Use nssa-external to display NSSA external LSAs.
opaque-area Use opaque-area to display area opaque LSAs.
opaque-as Use opaque-as to display AS opaque LSAs.
opaque-link Use opaque-link to display link opaque LSAs.
router Use router to display router LSAs.
summary Use summary to show the LSA database summary information.