NETGEAR client-name, default-router, dns-server

Utility Commands
565
ProSafe M4100 and M7100 Managed Switches
client-name
This command specifies the name for a DHCP client. Name is a string consisting of standard
ASCII characters.
Default
Format client-name <name>
Mode
no client-name
This command removes the client name.
Format no client-name
Mode
default-router
This command specifies the default router list for a DHCP client. {address1, address2…
address8} are valid IP addresses, each made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid.
Default
Format default-router <address1> [<address2>....<address8>]
Mode
no default-router
This command removes the default router list.
Format no default-router
Mode
dns-server
This command specifies the IP servers available to a DHCP client. Address parameters are
valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address
0.0.0.0 is invalid.
Default
Format dns-server <address1> [<address2>....<address8>]
Mode
none
DHCP Pool Config
DHCP Pool Config
none
DHCP Pool Config
DHCP Pool Config
none
DHCP Pool Config