Switching Commands
159
ProSafe M4100 and M7100 Managed Switches
no set igmp querier query-interval
Use this command to set the IGMP Querier Query Interval time to its default value.
Format no set igmp querier query-interval
Mode
set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period. It is the time period that
the switch remains in Non-Querier mode once it has discovered that there is a Multicast
Querier in the network.
Default
Format set igmp querier timer expiry <60-300>
Mode
no set igmp querier timer expiry
Use this command to set the IGMP Querier timer expiration period to its default value.
Format no set igmp querier timer expiry
Mode
set igmp querier version
Use this command to set the IGMP version of the query that the snooping switch is going to
send periodically.
Default
Format set igmp querier version <1-2>
Mode
no set igmp querier version
Use this command to set the IGMP Querier version to its default value.
Format no set igmp querier version
Mode
set igmp querier election participate
Use this command to enable the Snooping Querier to participate in the Querier Election
process when it discovers the presence of another Querier in the VLAN. When this mode is
enabled, if the Snooping Querier finds that the other Querier’s source address is better (less)
Global Config
60 seconds
Global Config
Global Config
1
Global Config
Global Config