NETGEAR show ipv6 access-lists

Quality of Service (QoS) Commands
487
ProSafe M4100 and M7100 Managed Switches
no ipv6 traffic-filter
This command removes an IPv6 ACL identified by <name> from the interface(s) in a given
direction.
Format no ipv6 traffic-filter <name> {{control-plane|in|out}|vlan <vlan-id>
{in|out}}
Modes • Global Config
• Interface Config
show ipv6 access-lists
This command displays an IPv6 access list and all of the rules that are defined for the IPv6
ACL. Use the [name] parameter to identify a specific IPv6 ACL to display.
Format show ipv6 access-lists [name]
Mode
Format ipv6 traffic-filter <name> {{control-plane|in|out}|vlan <vlan-id>
{in|out}} [sequence <1-4294967295>]
Modes • Global Config
• Interface Config
Privileged EXEC
Term Definition
Rule Number The ordered rule number identifier defined within the IPv6 ACL.
Action The action associated with each rule. The possible values are Permit or Deny.
Match All Indicates whether this access list applies to every packet. Possible values are True or
False.
Protocol The protocol to filter for this rule.
Source IP
Address The source IP address for this rule.
Source L4 Port
Keyword The source port for this rule.
Destination IP
Address The destination IP address for this rule.
Destination L4
Port Keyword The destination port for this rule.
IP DSCP The value specified for IP DSCP.
Flow Label The value specified for IPv6 Flow Label.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this rule are assigned.