Utility Commands
577
ProSafe M4100 and M7100 Managed Switches
name command, is used only when the default domain name list is empty. A maximum of 32
names can be entered in to this list.
Default
Format ip domain list <name>
Mode
no ip domain list
Use this command to delete a name from a list.
Format no ip domain list <name>
Mode
ip name server
Use this command to configure the available name servers. Up to eight servers can be
defined in one command or by using multiple commands. The parameter
<server-address> is a valid IPv4 or IPv6 address of the server. The preference of the
servers is determined by the order they were entered.
Format ip name-server <server-address1> [server-address2...server-address8]
Mode
no ip name server
Use this command to remove a name server.
Format no ip name-server [server-address1...server-address8]
Mode
ip host
Use this command to define static host name-to-address mapping in the host cache. <name>
is host name. <ip address> is the IP address of the host.
Default
Format ip host <name> <ipaddress>
Mode
none
Global Config
Global Config
Global Config
Global Config
none
Global Config