Quality of Service (QoS) Commands
483
ProSafe M4100 and M7100 Managed Switches
show ip access-lists

This command displays an IP ACL <accesslistnumber> is the number used to identify

the IP ACL.

Format show ip access-lists <accesslistnumber>
Mode

Note: Only the access list fields that you configure are displayed.

Privileged EXEC
Term Definition
Rule Number The number identifier for each rule that is defined for the IP ACL.
Action The action associated with each rule. The possible values are Permit or Deny.
Match All Indicates whether this access list applies to every packet. Possible values are True or
False.
Protocol The protocol to filter for this rule.
Source IP
Address The source IP address for this rule.
Source IP Mask The source IP Mask for this rule.
Source L4 Port
Keyword The source port for this rule.
Destination IP
Address The destination IP address for this rule.
Destination IP
Mask The destination IP Mask for this rule.
Destination L4
Port Keyword The destination port for this rule.
IP DSCP The value specified for IP DSCP.
IP Precedence The value specified IP Precedence.
IP TOS The value specified for IP TOS.
Log Displays when you enable logging for the rule.
Assign Queue The queue identifier to which packets matching this rule are assigned.
Mirror Interface The slot/port to which packets matching this rule are copied.
Redirect
Interface The slot/port to which packets matching this rule are forwarded.
Time Range
Name Displays the name of the time-range if the ACL rule has referenced a time range.
Rule Status Status (Active/Inactive) of the ACL rule.