NETGEAR clear ipv6 ospf, clear ipv6 ospf configuration, clear ipv6 ospf counters, clear ipv6 ospf neighbor

IPv6 Commands
391
ProSafe M4100 and M7100 Managed Switches
no auto-cost reference-bandwidth (OSPFv3)
Use this command to set the reference bandwidth to the default value.
Format no auto-cost reference-bandwidth
Mode
clear ipv6 ospf
Use this command to disable and re-enable OSPF.
Format clear ipv6 ospf
Mode
clear ipv6 ospf configuration
Use this command to reset the OSPF configuration to factory defaults.
Format clear ipv6 ospf configuration
Mode
clear ipv6 ospf counters
Use this command to reset global and interface statistics.
Format clear ipv6 ospf counters
Mode
clear ipv6 ospf neighbor
Use this command to drop the adjacency with all OSPF neighbors. On each neighbor’s
interface, send a one way hello. Adjacencies might then be reestablished. To drop all
adjacencies with a specific router ID, specify the neighbor’s Router ID using the optional
parameter [neighbor-id].
Format clear ipv6 ospf neighbor [neighbor-id]
Mode
Format auto-cost reference-bandwidth <1 to 4294967>
Mode Router OSPFv3 Config
Router OSPFv3 Config
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC