Routing Commands
300
ProSafe M4100 and M7100 Managed Switches
If you specify an IP address for the neighbor router, the following fields display:
Interface
Neighbor IP
Address
Interface Index
Area ID
Options
Router Priority
Dead Timer Due
Up Time
State
Events
Retransmission
Queue Length
The following shows example CLI display output for the command.
(Switch) #show ip ospf neighbor 170.1.1.50
Interface.....................................0/17
Neighbor IP Address...........................170.1.1.50
Interface Index...............................17
Area Id.......................................0.0.0.2
Options.......................................0x2
Router Priority...............................1
Dead timer due in (secs)......................15
Up Time.......................................0 days 2 hrs 8 mins 46 secs
State.........................................Full/BACKUP-DR
Events........................................4
Retransmission Queue Length...................0
Term Definition
Valid slot and port number separated by forward slashes.
The IP address of the neighbor router.
The interface ID of the neighbor router.
The area ID of the OSPF area associated with the interface.
An integer value that indicates the optional OSPF capabilities supported by the neighbor.
The neighbor's optional OSPF capabilities are also listed in its Hello packets. This
enables received Hello Packets to be rejected (that is, neighbor relationships will not
even start to form) if there is a mismatch in certain crucial OSPF capabilities.
The OSPF priority for the specified interface. The priority of an interface is a priority
integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the
designated router on this network.
The amount of time, in seconds, to wait before the router assumes that the neighbor is
unreachable.
Neighbor uptime; how long since the adjacency last reached the Full state.
The state of the neighboring routers.
The number of times this neighbor relationship has changed state, or an error has
occurred.
An integer representing the current length of the retransmission queue of the specified
neighbor router Id of the specified interface.