Uptime
Protocol
State
Transitioned to
Master
Advertisement
Received
Advertisement
Interval Errors
Authentication
Failure
IP TTL errors
Zero Priority
Packets
Received
Zero Priority
Packets Sent
Invalid Type
Packets
Received
Address List
Errors
Invalid
Authentication
Type
Authentication
Type Mismatch
Packet Length
Errors
Routing Commands
255
ProSafe M4100 and M7100 Managed Switches
show ip vrrp

This command displays whether VRRP functionality is enabled or disabled on the switch. It

also displays some global parameters which are required for monitoring. This command

takes no options.

Format show ip vrrp
Modes • Privileged EXEC
• User EXEC
Term Definition
The time that the virtual router has been up, in days, hours, minutes, and seconds.
The protocol configured on the interface.
The total number of times virtual router states has changed to MASTER.
The total number of VRRP advertisements received by this virtual router.
The total number of VRRP advertisements received for which advertisement interval is
different than the configured value for this virtual router.
The total number of VRRP packets received that do not pass the authentication check.
The total number of VRRP packets received by the virtual router with IP TTL (time to live)
not equal to 255.
The total number of VRRP packets received by virtual router with a priority of '0'.
The total number of VRRP packets sent by the virtual router with a priority of '0'.
The total number of VRRP packets received by the virtual router with invalid 'type' field.
The total number of VRRP packets received for which address list does not match the
locally configured list for the virtual router.
The total number of VRRP packets received with unknown authentication type.
The total number of VRRP advertisements received for which 'auth type' not equal to
locally configured one for this virtual router.
The total number of VRRP packets received with packet length less than length of VRRP
header.