Routing Commands
259
ProSafe M4100 and M7100 Managed Switches

show bootpdhcprelay

This command displays the BootP/DHCP Relay information.
Format show bootpdhcprelay
Modes • Privileged EXEC
• User EXEC
IP Helper Commands
This section describes the commands to configure a DHCP relay agent with multiple DHCP
server addresses per routing interface, and to use different server addresses for client
packets arriving on different interfaces on the relay agent.

clear ip helper statistics

Use this command to reset the statistics displayed in the show ip helper statistics
command to zero.
Format clear ip helper statistics
Mode

ip helper-address (Global Config)

Use the Global Configuration ip helper-address command to have the switch forward User
Datagram Protocol (UDP) broadcasts received on an interface. To disable the forwarding of
broadcast packets to specific addresses, use the no form of this command.
Term Definition
Maximum Hop
Count The maximum allowable relay agent hops.
Minimum Wait
Time (Seconds) The minimum wait time.
Admin Mode Indicates whether relaying of requests is enabled or disabled.
Server IP
Address The IP address for the BootP/DHCP Relay server.
Circuit Id
Option Mode The DHCP circuit Id option which might be enabled or disabled.
Requests
Received The number or requests received.
Requests
Relayed The number of requests relayed.
Packets
Discarded The number of packets discarded.
Privileged EXEC