Using the Command-Line Interface
8
ProSafe M4100 and M7100 Managed Switches
Licensing and Command Support

As shown in the following table, some command groups, or commands, require a license and

some are supported on particular switch models. For those requiring a license, license keys

are available from your VAR or NETGEAR authorized e-commerce portal. License activation

is described in the Software Setup Manual.

Command Group or Command M4100 M7100
Router Discovery Protocol Commands Not supported Not supported
Virtual Router Redundancy Protocol Commands Not supported Not supported
Open Shortest Path First (OSPF) Commands Not supported Not supported
OSPF Graceful Restart Commands Not supported Not supported
Routing Information Protocol (RIP) Commands Not supported Not supported
Tunnel Interface Commands Not supported Not supported
IPv6 Routing Commands Not supported Not supported
OSPFv3 Commands Not supported Not supported
OSPFv3 Graceful Restart Commands Not supported Not supported
DHCPv6 Commands Not supported Not supported
Multicast Commands Not supported Not supported
DVMRP Commands Not supported Not supported
PIM Commands Not supported Not supported
Internet Group Message Protocol (IGMP) Commands Not supported Not supported
IGMP Proxy Commands Not supported Not supported
IPv6 Multicast Forwarder Commands Not supported Not supported
IPv6 PIM Commands Not supported Not supported
IPv6 MLD Commands Not supported Not supported
IPv6 MLD-Proxy Commands Not supported Not supported
PoE Commands Supported on PoE
models only Not supported
MVR Commands Supported Supported
Link Local Protocol Filtering Commands Not supported Supported
Priority-Based Flow Control Commands Not Supported Not supported
cos-queue random-detect Supported Supported
no cos-queue random-detect Supported Supported
random-detect exponential weighting-constant Supported Supported
no random-detect exponential weighting-constant Supported Supported