Utility Commands
592
ProSafe M4100 and M7100 Managed Switches
no debug ip vrrp
Use this command to disable VRRP debug protocol messages.
Format no debug ip vrrp
Mode
debug ipv6 dhcp
Use this command to display “debug” information about DHCPv6 client activities and trace
DHCPv6 packets to and from the local DHCPv6 client.
Default
Format debug ipv6 dhcp
Mode
no ipv6 debug dhcp
Use this command to disable the display of “debug” trace output for DHCPv6 client activity.
Format no debug ipv6 dhcp
Mode
debug ipv6 mcache packet
Use this command for tracing MDATAv6 packet reception and transmission. receive traces
only received data packets and transmit traces only transmitted data packets. When neither
keyword is used in the command, then all data packet traces are dumped. Vital information
such as source address, destination address, packet length, and the interface on which the
packet is received or transmitted is displayed on the console.
Default
Format debug ipv6 mcache packet [receive|transmit]
Mode
no debug ipv6 mcache packet
Use this command to disable debug tracing of MDATAv6 packet reception and transmission.
Format no debug ipv6 mcache packet [receive|transmit]
Mode
Privileged EXEC
disabled
Privileged EXEC
Privileged EXEC
disabled
Privileged EXEC
Privileged EXEC