NETGEAR shutdown, shutdown all

Switching Commands
23
ProSafe M4100 and M7100 Managed Switches
no mtu
This command sets the default MTU size (in bytes) for the interface.
Format no mtu
Mode
shutdown
This command disables a port.
Note: You can use the shutdown command on physical and port-channel
(LAG) interfaces, but not on VLAN routing interfaces.
no shutdown
This command enables a port.
Format no shutdown
Mode
shutdown all
This command disables all ports.
Note: You can use the shutdown all command on physical and
port-channel (LAG) interfaces, but not on VLAN routing interfaces.
Default 1518 (untagged)
Format mtu <1518-9216>
Mode Interface Config
Interface Config
Format shutdown
Mode Interface Config
Interface Config
Format shutdown all
Mode Global Config