NETGEAR show hardware, show version

Utility Commands
518
ProSafe M4100 and M7100 Managed Switches
Note: Event log information is retained across a switch reset.
show hardware
This command displays inventory information for the switch.
Note: The show version command and the show hardware command
display the same information. In future releases of the software, the
show hardware command will not be available. For a description of
the command output, see the command show version on page 518.
show version
This command displays inventory information for the switch.
Note: The show version command will replace the show hardware
command in future releases of the software.
Task Id The task ID of the event.
Code The event code.
Time The time this event occurred.
Unit The unit for the event.
Format show hardware
Mode Privileged EXEC
Format show version
Mode Privileged EXEC
Term Definition