Utility Commands
569
ProSafe M4100 and M7100 Managed Switches
netbios-node-type
The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration
Protocol (DHCP) clients. type specifies the NetBIOS node type. Valid types are:
• b-node—Broadcast
• p-node—Peer-to-peer
��� m-node—Mixed
• h-node—Hybrid (recommended)
Default
Format netbios-node-type <type>
Mode
no netbios-node-type
This command removes the NetBIOS node Type.
Format no netbios-node-type
Mode
next-server
This command configures the next server in the boot process of a DHCP client.The
<address> parameter is the IP address of the next server in the boot process, which is
typically a TFTP server.
Default
Format next-server <address>
Mode
no next-server
This command removes the boot server list.
Format no next-server
Mode
option
The option command configures DHCP Server options. The <code> parameter specifies
the DHCP option code and ranges from 1-254. The <ascii string> parameter specifies
an NVT ASCII character string. ASCII character strings that contain white space must be
delimited by quotation marks. The hex <string> parameter specifies hexadecimal data. In
hexadecimal, character strings are two hexadecimal digits. You can separate each byte by a
none
DHCP Pool Config
DHCP Pool Config
inbound interface helper addresses
DHCP Pool Config
DHCP Pool Config