IPv6 Commands
409
ProSafe M4100 and M7100 Managed Switches
show ipv6 ospf range

This command displays information about the area ranges for the specified <areaid>. The

<areaid> identifies the OSPF area whose ranges are being displayed.

Format show ipv6 ospf range <areaid>
Modes • Privileged EXEC
• User EXEC
show ipv6 ospf stub table

This command displays the OSPF stub table. The information below will only be displayed if

OSPF is initialized on the switch.

Format show ipv6 ospf stub table
Modes • Privileged EXEC
• User EXEC
Events Number of times this neighbor relationship has changed state, or an error has occurred.
Retransmission
Queue Length An integer representing the current length of the retransmission queue of the specified
neighbor router Id of the specified interface.
Term Definition
Area ID The area id of the requested OSPF area.
IP Address An IP address which represents this area range.
Lsdb Type The type of link advertisement associated with this area range.
Advertisement The status of the advertisement: enabled or disabled.
Term Definition
Area ID A 32-bit identifier for the created stub area.
Type of Service Type of Service associated with the stub metric. For this release, Normal TOS is the only
supported type.
Metric Val The metric value is applied based on the TOS. It defaults to the least metric of the Type
of Service among the interfaces to other areas. The OSPF cost for a route is a function of
the metric value.
Import
Summary LSA Controls the import of summary LSAs into stub areas.
Term Definition