NETGEAR show ipv6 ospf virtual-link , show ipv6 ospf virtual-link brief

IPv6 Commands
410
ProSafe M4100 and M7100 Managed Switches
show ipv6 ospf virtual-link
This command displays the OSPF Virtual Interface information for a specific area and
neighbor. The <areaid> parameter identifies the area and the <neighbor> parameter
identifies the neighbor’s Router ID.
Format show ipv6 ospf virtual-link <areaid> <neighbor>
Modes • Privileged EXEC
• User EXEC
show ipv6 ospf virtual-link brief
This command displays the OSPFV3 Virtual Interface information for all areas in the system.
Format show ipv6 ospf virtual-link brief
Modes • Privileged EXEC
• User EXEC
Term Definition
Area ID The area id of the requested OSPF area.
Neighbor
Router ID The input neighbor Router ID.
Hello Interval The configured hello interval for the OSPF virtual interface.
Dead Interval The configured dead interval for the OSPF virtual interface.
Iftransit Delay
Interval The configured transit delay for the OSPF virtual interface.
Retransmit
Interval The configured retransmit interval for the OSPF virtual interface.
Authentication
Type The type of authentication the interface performs on LSAs it receives.
State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router, and backup designated router. This is the state of the OSPF interface.
Neighbor State The neighbor state.
Term Definition
Area ID The area id of the requested OSPFV3 area.
Neighbor The neighbor interface of the OSPFV3 virtual interface.
Hello Interval The configured hello interval for the OSPFV3 virtual interface.
Dead Interval The configured dead interval for the OSPFV3 virtual interface.