NETGEAR show mldsnooping

Switching Commands
166
ProSafe M4100 and M7100 Managed Switches
no set mld mrouter interface
Use this command to disable the status of the interface as a statically configured multicast
router-attached interface.
Format no set mld mrouter interface
Mode
show mldsnooping
Use this command to display MLD Snooping information. Configured information is displayed
whether or not MLD Snooping is enabled.
Format show mldsnooping [slot/port | vlanid]
Mode
When the optional arguments slot/port or vlanid are not used, the command displays
the following information.
Admin Mode
Interfaces
Enabled for
MLD Snooping
MLD Control
Frame Count
VLANs Enabled
for MLD
Snooping
When you specify the slot/port values, the following information displays.
MLD Snooping
Admin Mode
Fast Leave
Mode
Group
Membership
Interval
Max Response
Time
Multicast
Router Present
Expiration Time
Interface Config
Privileged EXEC
Term Definition
Indicates whether or not MLD Snooping is active on the switch.
Interfaces on which MLD Snooping is enabled.
Displays the number of MLD Control frames that are processed by the CPU.
VLANs on which MLD Snooping is enabled.
Term Definition
Indicates whether MLD Snooping is active on the interface.
Indicates whether MLD Snooping Fast Leave is active on the VLAN.
Shows the amount of time in seconds that a switch will wait for a report from a particular
group on a particular interface, which is participating in the VLAN, before deleting the
interface from the entry. This value may be configured.
Displays the amount of time the switch waits after it sends a query on an interface,
participating in the VLAN, because it did not receive a report for a particular group on that
interface. This value may be configured.
Displays the amount of time to wait before removing an interface that is participating in
the VLAN from the list of interfaces with multicast routers attached. The interface is
removed if a query is not received. This value may be configured.