IP Multicast Commands
338
ProSafe M4100 and M7100 Managed Switches
ip pim ssm
Use this command to define the Source Specific Multicast (SSM) range of IP multicast
addresses.
Default
Format ip pim ssm {default | <group-address> <group-mask>}
Mode
default-range
no ip pim ssm
This command is used to disable the Source Specific Multicast (SSM) range.
Format no ip pim ssm {default | <group-address> <group-mask>}
Mode
ip pim-trapflags
This command enables the PIM trap mode for both Sparse Mode (SM) and Dense Mode.
(DM).
Default
Format ip pim-trapflags
Mode
no ip pim-trapflags
This command sets the PIM trap mode to the default.
Format no ip pim-trapflags
Mode
show ip pim
This command displays the system-wide information for PIM (global configuration mode and
interface status).
Format show ip pim
Modes
disabled
Global Config
Parameter Description
Defines the SSM range access list to 232/8.
Global Config
disabled
Global Config
Global Config
Privileged EXEC