NETGEAR ipv6 pim bsr-border, ipv6 pim bsr-candidate

IPv6 Multicast Commands
427
ProSafe M4100 and M7100 Managed Switches
(Switch) #show ipv6 pim interface 0/1
Interface...................................... 0/1
Mode........................................... Dense
Hello Interval (secs).......................... 30
Join Prune Interval (secs)..................... 60
DR Priority.................................... 1
BSR Border..................................... Disabled
ipv6 pim bsr-border
Use this command to prevent bootstrap router (BSR) messages from being sent or received
through an interface.
Default
Format ipv6 pim bsr-border
Mode
no ipv6 pim bsr-border
Use this command to disable the interface from being the BSR border.
Format no ipv6 pim bsr-border
Mode
ipv6 pim bsr-candidate
Use this command to configure the router to announce its candidacy as a bootstrap router
(BSR).
Hello Interval Hello interval value. The frequency at which PIM hello messages are transmitted on
this interface. By default, the value is 30 seconds.
Join-prune Interval Join-prune interval value.
DR Priority DR priority configured on this interface. This is not applicable if the interface mode is
Dense.
BSR Border Indicates whether the interface is configured as a BSR border.
Neighbor Count Number of PIM neighbors discovered on the interface. This field is displayed only
when the interface is operational.
Designated-Router IP address of the elected DR on the interface. This field is displayed only when the
interface is operational.
disabled
Interface Config
Interface Config
Default None
Term Definition