Multicast VLAN Registration (MVR)
215
ProSafe M4100 and M7100 Managed Switches
no mvr group
This command removes the MVR membership group.
mvr mode
This command changes the MVR mode type. If the mode is set to compatible, the switch does
not learn multicast groups; they need to be configured by the operator as the protocol does not
forward joins from the hosts to the router. To operate in this mode, the IGMP router needs to be
statically configured to transmit all required multicast streams to the MVR switch. If the mode is
set to dynamic, the switch learns existing multicast groups by snooping the IGMP queries from
router on source ports and forwarding the IGMP joins from the hosts to the IGMP router on the
multicast VLAN (with appropriate translation of the VLAN ID).
no mvr mode
This command sets the mode type to the default value.
mvr querytime
This command sets the MVR query response time.
no mvr querytime
This command sets the MVR query response time to the default value.
Format no mvr group <A.B.C.D> [count]
Mode Global Config
Format mvr mode { compatible |dynamic }
Mode Global Config
Default compatible
Format no mvr mode
Mode Global Config
Format mvr querytime<1-100>
Mode Global Config
Default 5
Format no mvr querytime
Mode Global Config