Routing Commands
294
ProSafe M4100 and M7100 Managed Switches

The information below is only displayed if OSPF is enabled.

Format show ip ospf [<areaid>] database [{database-summary | [{asbr-summary
| external | network | nssa-external | opaque-area | opaque-as |
opaque-link | router | summary}] [{adv-router [<ipaddr>] |
self-originate}]}]
Mode • Privileged EXEC
• User EXEC

For each link-type and area, the following information is displayed:

Adv Router
Age
Sequence
Checksum
Options
Rtr Opt
show ip ospf database database-summary

Use this command to display the number of each type of LSA in the database for each area

and for the router. The command also displays the total number of LSAs in the database.

Format show ip ospf database database-summary
Modes • Privileged EXEC
• User EXEC
adv-router Use adv-router to show the LSAs that are restricted by the advertising router.
self-originate Use self-originate to display the LSAs in that are self originated. The information
below is only displayed if OSPF is enabled
Term Definition
The Advertising Router. Is a 32 bit dotted decimal number representing the LSDB
interface.
A number representing the age of the link state advertisement in seconds.
A number that represents which LSA is more recent.
The total number LSA checksum.
This is an integer. It indicates that the LSA receives special handling during routing
calculations.
Router Options are valid for router links only.
Term Definition
Router Total number of router LSAs in the OSPF link state database.
Network Total number of network LSAs in the OSPF link state database.
Summary Net Total number of summary network LSAs in the database.
Summary ASBR Number of summary ASBR LSAs in the database.
Parameter Description