Utility Commands
537
ProSafe M4100 and M7100 Managed Switches

no logging syslog

This command disables syslog logging.

Format no logging syslog
Mode
logging syslog source-interface

This command configures the syslog source-interface.

Format logging syslog source-interface {<u/s/p> | {loopback <loopback-id>}
| {tunnel <tunnel-id>}}
Mode
show logging

This command displays logging configuration information.

Format show logging
Mode
Logging Client
Local Port
CLI Command
Logging
Console
Logging
Console
Logging
Severity Filter
Buffered
Logging
Syslog Logging
Log Messages
Received
Log Messages
Dropped
Log Messages
Relayed
Global Config
Global Config
Privileged EXEC
Term Definition
The port on the collector/relay to which syslog messages are sent.
Shows whether CLI Command logging is enabled.
Shows whether console logging is enabled.
The minimum severity to log to the console log. Messages with an equal or lower
numerical severity are logged.
Shows whether buffered logging is enabled.
Shows whether syslog logging is enabled.
Number of messages received by the log process. This includes messages that are
dropped or ignored.
Number of messages that could not be processed due to error or lack of resources.
Number of messages sent to the collector/relay.