NETGEAR Cable Test Command

Utility Commands
603
ProSafe M4100 and M7100 Managed Switches
debug aaa accounting
This command is useful for debugging accounting configuration and functionality in User
Manager.
Format debug aaa accounting
Mode
no debug aaa accounting
Use this command to turn off debugging of User Manager accounting functionality.
Format no debug aaa accounting
Mode
debug aaa authorization
This command is useful for debugging authorization configuration and functionality in User
Manager.
Format debug aaa authorization [commands|exec]
Mode
no debug aaa authorization
Use this command to turn off debugging of User Manager authorization functionality.
Format no debug aaa authorization
Mode
Cable Test Command
The cable test feature enables you to determine the cable connection status on a selected
port.
Note: The cable test feature is supported only for copper cable. It is not
supported for optical fiber cable. If the port has an active link while
the cable test is run, the link can go down for the duration of the test.
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC