Orbit Manufacturing manual Orbit 2000 Operation and Maintenance Manual Applications

Orbit™ 2000 Operation and Maintenance Manual Applications

3/

4/

5/

6/

7/

8/

9/

10/

11/

12/

Load the sheet stack on the feed table. ( Described in Section 5 )

Adhere one sheet of the same width as the sheets in the feeder to start the film web.

Switch the compressor on and push the start button at it’s slowest speed.

Stop the machine at the instant the first sheet passes under the chrome roller and the leading edge of the paper appears to be at least 8 in. ( 200 mm ) past the contact area between the laminating rollers.

Press the pressure up button.

At the slowest speed of the machine, allow 2-3 sheets pass through the laminating rollers so you can thread the web through the snapping section.

Feed the web through the decurling bar.

Feed the web through the pull rollers. ( Described in Section 5 )

Feed the web through the twin knife assembly. ( Described in Section 5 )

Feed the web through the snap rollers. ( Described in Section 5 )

© GBC Films Group January 2001 Page 6 - 3