Orbit™ 2000 Operation and Maintenance Manual | Warranty |
|
|
2.3.1 Warranty is not applicable to the following conditions:
1/ Damage to the chrome laminating roller, rubberized feeding rollers, pressure rollers, pull rollers and snapping rollers if caused by knives, razor blades or any other type of sharp tool.
2/ Damage to the chrome laminating roller, rubberized feeding rollers, pressure rollers, pull rollers and snapping rollers if caused by:
–any object falling into the working area of the machine.
–cleaning the rollers using solutions or material that could harm the surface. Refer to Section 8 Maintenance under cleaning the rollers for suitable cleaners.
3/ Damage to the
–mechanically
–by using cleaners that would harm the
4/ Damage to the exterior finish caused:
–mechanically
–by using cleaning solvents that would harm the finish. Refer to Section 8 Maintenance under cleaning the exterior for suitable cleaners.
5/ Damage to the feeding head by incompetent handling or adjusting.
6/ Damage to the machine caused by:
–moving
–installation performed by any person other than a qualified GBC service technician
–Operation of the equipment by person(s) not fully trained in all aspects of the machine.
© GBC Films Group January 2001 | Page 2 - 3 |
