Orbit™ 2000 Operation and Maintenance Manual | Operations |
|
|
Automatic pressure cancellation
The closure of the pressure rollers is controlled by the PLC. The PLC will open the pressure rollers two minutes after the laminator stops to prevent damage to the rubber roller surface.
Automatic pressure cancellation occurs when:
–two ( 2 ) minutes has expired after the machine has been switched off.
–two ( 2 ) minutes has expired form an idle state.
( You can reengage the pressure rollers by pressing the pressure roller selector switch to Close/ Up position. )
P R E S S U R E R O L L
U PU P
N e w o ve rla y
D O W ND O W N
O rig in a l o ve rla y
( The up indicator is illuminated when the pressure roller is up )
–immediately after an emergency stop push button has been depressed.
–immediately after power has been removed or turned off.
© GBC Films Group January 2001 | Page 5 - 31 |
