Orbit™ 2000 Operation and Maintenance Manual | Maintenance |
|
|
8.2.2Safety - Rules for maintenance/ replacement of the twin knife
The twin knife is very sharp and extreme caution should be exercised when working in its vicinity. For safe work, the following safety rules should be followed:
1/
2/
3/
4/
W A R N I N G
WARNING: Knife has sharp edges! Do not touch the sharp edges of the knives .
W A R N I N G
WARNING: For safe knife adjustment, use a 4 mm allen wrench only . The allen
wrench can be inserted through the oval shaped openings in the upper
section of the plastic guard of the twin knife.
W A R N I N G
WARNING: Do not place your fingers or objects under the plastic guard,
unless the equipment is disconnected from the power supply and the
emergency stop switch is depressed .
ELECTRICAL
S H O C K
Do not remove or modify any guards, covers or enclosures . Contact with any
moving parts or/ and electrical voltage can result in injury or death!
© GBC Films Group January 2001 | Page 8 - 7 |
