Operations | Orbit™ 2000 Operation and Maintenance Manual |
|
|
To change the from R2 to R3 and vice versa, follow the steps below:
1/
Remove the four 8 mm bolts ( a ).
R 2
2/
3/
| R 3 |
Turn the decurling bar ( b ) with the |
|
desired radius up. |
|
| b |
Replace the four 8 mm bolts ( a ). | a |
Effects of the decurling bar
The sheets should lay flat when exiting the snapping rollers and are collected on the stacking
table.
Correctly decurled sheets | Incorrectly decurled sheets |
Stacking table | Stacking table |
Page 5 - 36 | © GBC Films Group January 2001 |
