Operations | Orbit™ 2000 Operation and Maintenance Manual |
|
|
3/ Set up the center suction cups ( g ) by adjusting strips ( e ) so the paper sheets between the cups are tight.
g
g | e |
4/
5/
Depending on the paper type, adjust vacuum as needed to lift the sheets via the transport suction cups by turning the regulator on the Becker compressor. The amount of vacuum can be observed on the manometer ( h ).
h 
The proper air pressure required to feather the paper is set up by means of regulators ( i ) and ( j ).
i
j
Page 5 - 12 | © GBC Films Group January 2001 |
