Obit™ 2000 Operation and Maintenance Manual | Troubleshooting |
|
|
7.3 Feeder troubleshooting
W A R N I N G
WARNING: Operator maintenance and operator adjustments may be performed
only by person(s) trained in all aspects of the equipment.
1.The table move is sluggish even without paper load.
W A R N I N G
CAUTION: Depress the emergency stop button before checking for chain tension!
W A R N I N G
CAUTION: Do not wear ties, loose fit clothing or dangling jewelry . These items
can get caught by moving parts while performing tasks .
Check the tension of each chain, and adjust properly. Clean or lubricate leading spindles.
2.The automatic operation is not consistent.
W A R N I N G
CAUTION: Only a qualified service technician may correct this fault .
Check the micro switch inside the feeder, check for loose wires and the contactor in the electrical cabinet.
© GBC Films Group January 2001 | Page 7 - 9 |
