Orbit™ 2000 Operation and Maintenance Manual | Operations |
|
|
5.3 Lamination section
The lamination section consists mainly of the spool arbor, heating controls, laminating rollers and the spreader roller.
The laminator serves the purpose of unwind the spool of film via the spool arbor, activating the thermal adhesive via the chrome roller, laying it on the fed sheets via the laminating rollers and decurling the sheets for flat separation via the decurling bar.
5.3.1 Film roll positioning
W A R N I N G
CAUTION: Do not wear ties, loose fit clothing or dangling jewelry . These items
can get caught the rollers while working around or loading film .
Use the following instructions to load a roll of film and to properly position it:
1/ Set the lateral film adjust nut ( a ) so that the face is in line with the marker ( b ) on the thread of
the spool arbor ( c ). This provides acenter point in which you can adjust the film shaft left or right to fine tune the film lay down on the sheets.
a
b
c
© GBC Films Group January 2001 | Page 5 - 23 |
