Orbit Manufacturing 2000 manual Electrical installation, EU Version US Version

Orbit™ 2000 Operation and Maintenance Manual Installation

4.5 Electrical installation

The main plug may be inserted only into a fixed electrical distribution socket, regularly inspected according to appropriate national standards. Prior to the start-up, the initial inspection of the machine electrical equipment must be done according to IEC 364-6-61 standard, which includes the fixed power input if the machine is not connected by a flexible cable. The machine may be started only when all electrical requirements have been complied with according to appropriate national standards for printing machines.

During the entire time of operation the user is obligated to comply with the requirements of applicable national standards for printing machines, and their electrical wiring.

	EU VERSION	US VERSION
Nominal voltage	3 NPE 400 V/230 V 50 Hz	3 Phase with ground
		230+/- 10% VAC 60 Hz
Operating voltage	24 VDC	24 VDC
Power input	5 kVA	5 kVA
Nominal current	30 Amps	30 Amps
Recommended fuses	25 A gTF 500V	25 A gTF 500V

Electrical installation has been designed, manufactured and tested according to EN 60204-1, 1992 Standard, and is shown on electrical installation schematic diagram BJ-41-110 to BJ-41-118, description BJ-41-211 to BJ-41-212, and lay-out BJ-41-200- to BJ-41-203.

The manufacturer of ORBIT 2000 guarantees that the machine complies with interference elimination to a level specified by EN 500081-1 part 1, in residential, business, and light industry zones.

Repairs, setup, and maintenance may be performed by a technically trained or sufficiently experienced person, who knows how to avoid dangers involved in manipulations with electricity, as stated in EN 60204- 1, article 3.55.

© GBC Films Group January 2001 Page 4 - 7