Installation | Orbit™ 2000 Operation and Maintenance Manual |
|
|
4.4 Transporting of the machine
The machine is shipped from the factory bolted to a wooden shipping pallet/ frame.
Note the position of the machine on the pallet/ frame as illustrated to the right.
Moving the machine on the pallet/ frame can only be accomplished with a lift truck or a pallet wagon.
The forks of the lift truck/ pallet wagon must be long enough to reach past the transport supports on the farthest side from the lift truck/ pallet wagon.
To remove the machine from the pallet/ frame:
– remove the shipping bolts
– drive the lift truck/ pallet wagon between the pallet/ frame and the machine frame
– slowly raise the machine from the pallet/ frame
–Replace the shipping angle irons with the leveling feet before final placement.
The shift of the machine from the frame to the floor is shown on the picture.
Page 4 - 6 | © GBC Films Group January 2001 |
