
Operations | Orbit™ 2000 Operation and Maintenance Manual |
|
|
8/ Tighten the 8 mm screws on both conical cones and tighten the nut ( g ) on the drive side conical cone ( h ) to secure the roll of film to the spool arbor ( c ).
g |
h |
c |
9/ Use the lateral film adjust nut ( a ) to fine tune the positioning of the spool arbor with respect to the pile stack and use the unwind brake nut ( i ) to apply tension to film roll on shaft.
i a
Page 5 - 26 | © GBC Films Group January 2001 |