
Operations | Orbit™ 2000 Operation and Maintenance Manual |
|
|
2/ Lower the spool arbor support arm ( d ) by pressing down on the latch ( e ) and pull towards you from the control side.
e
*YOUR MACHINE MAY OR MAY NOT HAVE A
SUPPORT ARM.
d
3/ Loosen the 8 mm screw to the control side conical cone ( f ) and slide it off of the spool arbor ( c ).
c
f
4/ Loosen the nut ( g ) on the drive side conical cone ( h ) and leave loose measurement purposes.
g
h
Page 5 - 24 | © GBC Films Group January 2001 |