
Orbit™ 2000 Operation and Maintenance Manual | Operations |
|
|
Sheet misfeed sensor
The sheet misfeed sensor protects the supporting laminating roller from the laminating adhesive. Check its function daily.
To check the sensor, follow the procedure below.
1/ Take a single sheet of paper, insert it under the sensor ( l ).
2/ Block the sensor repeatedly by sliding the sheet of paper in and out from under the sensor.
3/ The proper function is signaled by the sensor LED, which lights up accordingly.
l
W A R N I N G
CAUTION: Only a qualified service technician may repair the sheet overlap sensor .
© GBC Films Group January 2001 | Page 5 - 19 |