Troubleshooting | Orbit™ 2000 Operation and Maintenance Manual |
|
|
7.4 Misfed sheets troubleshooting
W A R N I N G
WARNING: Only person(s) trained in all aspects of the equipment may
perform any troubleshooting procedures .
PROBLEM | FIX |
• Paper is not acclimatized | – Feed at lower speed |
• Incorrect vacuum or pressure | – Adjust vacuum &/ or pressure |
W A R N I N G
WARNING: Press the stop button before performing any troubleshooting!
PROBLEM | FIX |
• Sheets are sticking | – Ream needs fanning |
• Side stacker plates are tight | – Adjust for a slight gap |
• Suctions cups are plugged | – Clean the suction cups |
• Suction cups are not picking up | – Replace the dry or worn |
the sheets | suction cup(s) |
Page 7 - 10 | © GBC Films Group January 2001 |
