
Maintenance |
|
|
|
|
|
|
|
| Orbit™ 2000 Operation and Maintenance Manual | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| W A R N I N G |
|
|
|
| ||||||||||||||
|
| ||||||||||||||||
4/ | WARNING: Always exercise Lock out/ Tag out procedures when performing any | ||||||||||||||||
| type of maintenance to avoid injury to yourself, others and to the equipment. | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
a/ Raise the snapping section safety shield.
b/ Remove the lock down thumb screw.
c/ With a #3 flat tip screwdriver, remove the four flat head shoulder bolts securing the twin knife safety cover.
d/ Replace the lock down thumb screw. This will prevent the twin knife assembly from sliding.
e/ Use a 4 mm allen wrench to remove the two hex bolts securing the blade you are replacing.
f/ Replace the knife.
g/ Secure the knife reusing the same bolts and a 4 mm allen wrench.
h/ Remove the lock down thumb screw.
i/ Replace the twin knife safety cover and secure in place using the same flat head shoulder bolts and a #3 flat tip screwdriver.
j/ Replace the lock down thumb screw.
Page 8 - 8 | © GBC Films Group January 2001 |