Orbit™ 2000 Operation and Maintenance Manual | Installation |
|
|
The Floor
The machine must be placed on a firm and reasonably even floor capable of supporting a load of 2500 kg/ square meter ( 36165 lb/ sq.ft. ).
Note
The machine is also provided with a terminal to connect an additional conductor for the inter- connection, since the value of leakage currents from noise suppression elements is higher than 3.5 mA AC. This terminal for the additional interconnection can be located on the bar between the side plates, when the lower cover on the operator's side has been opened. The additional interconnecting conductor is to be attached to this terminal.
ELECTRICAL
S H O C K
Only a qualified electrician should connect power to the laminator. You can be severely
shocked, electrocuted or cause a fire if power is improperly applied.
ELECTRICAL
S H O C K
Do not allow anything to rest on the power cord . Do not locate the cord where people can walk on it. You or others can be severely shocked, electrocuted or cause a fire.
© GBC Films Group January 2001 | Page 4 - 3 |
