Orbit™ 2000 Operation and Maintenance Manual | Safety |
|
|
1.0Safety regulations
1.1Safety - Complete equipment
1/
2/
3/
4/
ATTENTION
Do not operate this equipment unless you have read and understand this
operator manual and have been fully trained in its operation by a
qualified GBC service technician .
ATTENTION
The operator may use the Orbit 2000 only for the lamination of paper sheets . The equipment may not be used for any other type of work . The type of paper and film must comply with conditions of Section 2 of the Technical Specifications. The equipment is provided with means to control lamination functions . The controls as set up by the factory may not be modified or altered.
ATTENTION
Do not operate , adjust, service or repair the Orbit 2000 if you are under the
influence of alcohol, drugs, or medication.
ATTENTION
Do not operate the Orbit 2000 if you are ill or tired.
© GBC Films Group January 2001 | Page 1 - 1 |
