Orbit™ 2000 Operation and Maintenance Manual | Operations |
|
|
5.2.2 Feeder table positioning
When the paper pile has been loaded, press the “ FEEDER STACK/ PILE UP ” button. The table ( f) starts lifting, and its top position is determined by the Paper Pile Height Sensor ( g ), adjust so that the first gate exceeds the height of the paper by 6 mm.
ATTENTION
The capacity sensor may be adjusted by a qualified service technician only.
6 mm
First gate
g
f
© GBC Films Group January 2001 | Page 5 - 9 |
