Orbit Manufacturing 2000 manual Main Drive and Feed Table Gear Drive

Maintenance Orbit™ 2000 Operation and Maintenance Manual

– The voltage measured between the terminal PE and the test points may not exceed

U =3.3V	for	S= 1.o square millimeters
U = 2.6V	for	S= 1.5 sq. millimeters
U = 1.9V	for	S = 2.5 sq. millimeters

Where U is the largest drop in voltage and

Sis the smallest effective diameter of the protective conductor in the tested branch of the protective circuit.

–The number of measurements of the protective circuit link is given by the requirements of particular regulations and standards valid in the user’s country.

–MAIN DRIVE AND FEED TABLE GEAR DRIVE

– Running in	- 300 hrs	-oil PP 90 H
– Normal operation	- 400 hrs	-oil PP 90 H

In case of higher demands the ecologically acceptable oil TOP-BLEND may be used. TOP-BLEND allows for up to 10.000 operation hours between changes.

– VARIATOR

– Running in	-	10.000 hrs	- oil OTK	8 to 10
– Normal operation	-	10.000 hrs	- oil OTK	8 to 10

Page 8 - 4 © GBC Films Group January 2001