Orbit™ 2000 Operation and Maintenance Manual | Operations |
|
|
The separating elements setup
1/ The foot of the ( d ) feeler touches the top of the paper stack. Move the strip ( e ) to the stack so that its front edge is 5 to 7 mm within the paper and 4 to 6 mm above it. For various paper weights ( e ) must be set to provide for correct paper sheets separation.
5 - 7 mm
d | e |
4 - 6 mm
2/ Brushes ( f ) should overlap the paper edge by 2 to 3 mm, and touch the paper very lightly, and not interfere with paper sheets feathering. For heavier paper use only brushes instead of strips.
f
f
© GBC Films Group January 2001 | Page 5 - 11 |