Safety | Orbit™ 2000 Operation and Maintenance Manual |
|
|
5/
ATTENTION
All safety covers must be in place during operation . The equipment must not be started
and used, if all covers are not in place, and safety switches are not operational.
6/
7/
8/
9/
A T T E N T IO N
T est all three interlocked safety guards each day ( the chrom e roller guard, snap roller guard and the guard under the lam inating and snap A R G A s ) and the tw o em ergency stop sw itches ( one on the control panel and one on the drive side of the feeder ) and the pile up safety sw itch ( on the feeder table guide rails )to ensure that they function properly.
ATTENTION
Exercise extreme caution when working with sheets to avoid paper cuts .
ATTENTION
Never clean any rollers while the equipment is running. If needed, turn the rollers for
cleaning or testing by using the slow forward or slow reverse push buttons.
ATTENTION
When using the slow forward and slow reverse push buttons, push and release the buttons and wait for the machine to stop before cleaning the exposed area of the rollers.
Page 1 - 2 | © GBC Films Group January 2001 |
