Orbit™ 2000 Operation and Maintenance Manual | Operations |
|
|
5.2.6 Second gate
W A R N I N G
CAUTION: Only a qualified service technician may adjust the second gate .
The second gate ( a ) rigisters the sheet and drops out of the way releasing the sheet so that the overlap of the individual sheets are within the required limits of +/- 1.5 mm.
Position of the second gate
The top edge of the second gate ( a ) must exceed the height of the guide plate ( b ) by 2.3 to 2.7
mm.
b
2.3- 2.7 m m
a
© GBC Films Group January 2001 | Page 5 - 21 |
