Orbit Manufacturing 2000 manual Qualified, Safety Rules for electrical installation

Safety Orbit™ 2000 Operation and Maintenance Manual

1.10 Safety - Rules for electrical installation

1/

W A R N I N G

CAUTION: Repairs, adjustments and/ or maintenance may be performed by a qualified technician ( excludes any operator maintenance and operator adjustments ) . The word "qualified" is decribed below .

Qualified

•Any engineer that has experience with electrical and mechanical design of lamination equipment. The engineers should be fully aware of all aspects of safety with regards to lamination equipment.

•Any commissioning or service engineer must be of competent nature, trained and qualified to GBC Pro-Tech standards to fulfill that job. This person will have completed and passed the full service training course from GBC Pro-Tech.

•Any GBC Technician, GBC Specialist, and / or GBC Pro-Tech Technician that has been through the GBC Pro-Tech service training course.

2/

W A R N I N G

WARNING: Operator maintenance and operator adjustments may be performed

only by person(s) trained in all aspects of the equipment.

Page 1 - 20 © GBC Films Group January 2001