Orbit Manufacturing 2000 manual Wheel while changing the position of the decurling bar

Orbit™ 2000 Operation and Maintenance Manual Safety

1.9Safety - Rules for the position adjustment of the decurling bar

During lamination internal stress develops between paper and the chrome roller. The decurling bar straightens the sheets before they exit the lamination section. During adjustment of the bar, the following safety rules must be observed:

1/

2/

3/

4/

W A R N I N G

CAUTION: Exercise caution while loosening the decurling bar handle .

The securing screw and the edge of the groove on the regulating

wheel may collide during sudden loosening .

W A R N I N G

CAUTION: Exercise caution while adjusting the control lever position . During sudden change in the position of the control lever, the set-up lever of the decurling bar may be hit.

W A R N I N G

CAUTION: Do not place your fingers near the groove on the regulating

wheel while changing the position of the decurling bar.

W A R N IN G

C A U T IO N : D ue to heat em inating from the chrom e roller and pressure

roller area, avoid contact w ith the decurling bar.

© GBC Films Group January 2001 Page 1 - 19